Siemens SINUMERIK 840Di sl Operating Manual page 217

5
01/2008
Start
batch function
Select all
Cancel
selection
Load
Reactivate
© Siemens AG 2008 All rights reserved.
SINUMERIK 840Di sl/840D sl/840D Operating Manual HMI-Advanced (BAD) - 01/2008 Edition
"Load"
Vertical softkeys
All tools in the hit list are selected for batch processing.
The selection for batch processing is canceled for all tools in the hit
list.
"Loading" is initiated as a batch command for the selected tools. You
are prompted to enter the destination magazine and the load point in a
dialog box.
"Reactivate" is initiated as a batch command for the selected tools.
When reactivating a tool, the monitoring actual values and the wear
are reset. You can use the INI file (entry
n_ReactivatePositioningMode) to specify (for each filter)
whether reactivation is to be carried out "always", "never", or "on
request" with magazine positioning. Depending on the setting, the
dialog box prompts for positioning and the load point as appropriate to
the setting.
Parameters operating area
5.3 Tool management
5
5-217