Siemens SINUMERIK 840Di sl Operating Manual page 220

5
Parameters operating area
5.3 Tool management
Stop
Continue
Abort
OK
5-220
Vertical softkeys
Batch processing is halted. Processing of the active element up to this
point is either completed or canceled depending on the status and
batch type.
This softkey can only be used while batch processing is in progress.
Any batch processing operation that has been halted is continued.
This softkey can only be used while batch processing is halted.
Any batch processing operation that is halted is canceled. Non-
completed jobs are discarded and display returns to the "Filter
selection" screen.
This softkey can only be used while batch processing is halted.
All information relating to completed, detailed batch operations is
discarded and the display returns to the "Filter selection" screen:
This softkey can only be used when all detailed batch operations have
been completed, irrespective of whether errors occurred or not.
Batch processing continues running in the background when you
switch from your operator interface to other tool management screens
or to other operating areas.
SINUMERIK 840Di sl/840D sl/840D Operating Manual HMI-Advanced (BAD) - 01/2008 Edition
5
01/2008
© Siemens AG 2008 All rights reserved.