Alarm Setup - Bosch MIC612 Operation Manual

MIC612 Thermal Camera
9.7

Alarm Setup

The Alarm Setup Menu contains alarm inputs, outputs and rules.
Notice!
The maximum number of Alarm Inputs is eight (8), available only on the Alarm and Washer
Pump Drive Card (MIC-ALM) (sold separately). This card is available for non-IR power supply
units (PSUs) only. IR models only will show Alarm Inputs 1–4 and numbers 5–12 will display
NONE. See Layout of MIC-240PSU-2 and MIC-115PSU-2, page 17 for the specific number of
alarm Inputs and Outputs per PSU.
Alarm Setup
Exit...
Multi Alarm Setup
Inputs Setup...
Outputs Setup...
Rule Setup...
Restore
Defaults...
Focus / Iris: Select
Bosch Security Systems
On-Screen Display (OSD) Menus (Bosch Protocol) | en
Inputs Setup
Exit...
1. Alarm Input 1
2. Alarm Input 2
3. Alarm Input 3
4. Alarm Input 4
5. Alarm Input 5
6. Alarm Input 6
7. Alarm Input 7
8. Alarm Input 8
9. NONE
10. NONE
12. NONE
12. NONE
Focus / Iris: Select Type
Right / Left: Select Mode
Operation Manual
N.O.
N.O.
N.O.
N.O.
N.O.
N.O.
N.O.
N.O.
2016.03 | 2.2 | F.01U.249.416
55