MIC612 Thermal Camera
Quantity
Product
1 per camera
Shielded Composite Cable for MIC612 cameras
(See the model numbers and lengths at right.)
Quantity
Product
1 per camera
Power Supply Unit (PSU) for MIC cameras
2.3
Additional Tools Required
The following table lists additional tools (not supplied by Bosch) that are or may be required
to install a MIC camera:
Quantity Part
1
1
1
1
1
Bosch Security Systems
13 mm wrench for the mounting bolts
3 mm screwdriver for the terminal blocks in the MIC PSU
8 mm screwdriver for captive screws for the MIC PSU enclosure
Silicone sealant for ensuring a water tight seal [if not using the Nebar gasket]
Roll of PTFE tape
Operation Manual
Part Number
Size
MIC-THERCBL-2M
2 m
MIC-THERCBL-10M
10 m
MIC-THERCBL-20M
20 m
MIC-THERCBL-20M
25 m
Part Number
MIC-240PSU-2,
MIC-115PSU-2,
MIC-24PSU-2
Unpacking | en
9
2016.03 | 2.2 | F.01U.249.416