Install The Mic (Standard) Psu; Mic Psu Overview; About The Mic Shielded Composite Cable - Bosch MIC612 Operation Manual

14 en | Install the MIC (standard) PSU
5

Install the MIC (standard) PSU

5.1

MIC PSU Overview

Caution!
Use only the power supply specified for your specific model of camera.
!
Bosch provides a range of power supply units (PSUs) for MIC Series cameras. These units
have a variety of common voltages and provide all the connections needed for power,
telemetry and video.
Model Number
MIC-24PSU-2
MIC-115PSU-2
MIC-240PSU-2
Table 5.1: PSUs for MIC612
Each MIC PSU provides all of the connections needed for power, video, and telemetry for a
single MIC camera. Each MIC PSU has CE and FCC approval and has a cast-aluminum
enclosure that is weather-resistant (rated IP65). Features include:
–
–
–
–
Each MIC PSU ships with the following parts:
–
–
–
–
5.2

About the MIC Shielded Composite Cable

All connections (power, telemetry, video) to the MIC camera are provided through the screw
terminal connections in the MIC power supply. MIC shielded composite cables are multi-
conductor cables of various lengths (and gauges ranging from 14 - 18) that provide all power,
video, and telemetry connections between the MIC PSU and the MIC camera. The cables are
pre-made with a female terminated connector (14-pin) at one end for attachment to the male
connector installed into the base of the camera. The other end of the cables has free (non-
2016.03 | 2.2 | F.01U.249.416
Input Voltage
24 VAC
115 VAC
230 VAC
A provision for driving various optional interface cards mounted internally to the MIC
power supply enclosure (for example, an 8-input alarm card (MIC-ALM))
A provision for a signal interface card (MIC-BP4) to connect telemetry to Bosch Biphase
equipment
Screw termination of all cables (composite, telemetry, and ancillary) into and out of the
enclosure
Earth isolation and termination within the unit to control video earthing correctly and
thus prevent earth loops
Three (3) M12 cable glands for telemetry, video and ancillary equipment
One (1) M16 gland for connection of the shielded composite cable to the MIC camera
One (1) 1/2 in. NPT cable gland for the power cable connection
One (1) 1/2 in. NPT and one (1) M12 blanking plug
Dimensions
(H x W x D)
90 x 260 x 160 mm
(3.54 x 10.24 x 6.3 in.)
90 x 260 x 160 mm
(3.54 x 10.24 x 6.3 in.)
90 x 260 x 160 mm
(3.54 x 10.24 x 6.3 in.)
Operation Manual
MIC612 Thermal Camera
Weight
3.2 kg (7.1 lb)
3.2 kg (7.1 lb)
3.2 kg (7.1 lb)
Bosch Security Systems