Special Preset Commands, Pelco Protocol - Bosch MIC612 Operation Manual

40 en | Controlling the Camera
Keyboard Command User Action
0-Pattern
1-Pattern
2-Pattern
3-Pattern
4-Pattern
1 - Aux On / Aux Off Press
2 - Aux On / Aux Off Press
5 - Aux On / Aux Off Press
91 - Aux On
92 - Aux On
8.5

Special Preset Commands, Pelco Protocol

Some Pelco mode preset commands have a special meaning and override the normal Pelco
preset function as follows:
Preset Command
33-PRESET
34-PRESET
80-PRESET
81-PRESET
82-PRESET
92-PRESET
93-PRESET
2016.03 | 2.2 | F.01U.249.416
Description
Press Initiate recording continuous playback based upon
current Recording setting (A or B) in the Setup
Menu.
Press and hold Initiate recording based upon current Recording
setting (A or B) in the Setup Menu. Press ACK to
end recording.
Press Initiate Recording A continuous playback.
Press and hold Initiate Recording A. Press ACK to end recording.
Press Initiate Recording B continuous playback.
Press and hold Initiate Recording B. Press ACK to end recording.
Press Initiate the standard preset tour (Tour 1).
Press Initiate the custom preset tour (Tour 2).
Activate / deactivate alarm output 1.
This command is supported with Non-IR models
only if an optional 8-input alarm card is installed in
the PSU powering the camera.
Activate / deactivate alarm output 2.
This command is supported with Non-IR models
only if an optional 8-input alarm card is installed in
the PSU powering the camera.
Toggle switchable video output of MIC612 camera
between visible and thermal output.
Press Activate Zone Scan (display zone titles).
Press Deactivate Zone Scan (re-move zone titles).
Description
Pans the camera 180° (Flip).
Goes to Zero Pan (original home position).
Toggles the Synchronization Mode between Line Lock and Internal
(Pelco Frame Scan). This command is available if commands are
unlocked using the Main menu.
Initiates Preset Tour 1.
Initiates Preset Tour 2.
Sets the Left pan limit for an AutoScan with Limit Stops enabled.
Sets the Right pan limit for an AutoScan with Limit Stops enabled.
Operation Manual
MIC612 Thermal Camera
Bosch Security Systems