Bosch MIC612 Operation Manual page 29

MIC612 Thermal Camera
Figure 5.11: PCB links set to 0V
3.
4.
Figure 5.12: PCB links set to 18V
Bosch Security Systems
Break the two solder links and remove any excess solder.
Solder the links, using TCW link wire, from the left hand pads to the middle pads. The
power supply will now deliver 18 VAC to terminal block HD6.
Operation Manual
Install the MIC (standard) PSU | en
2016.03 | 2.2 | F.01U.249.416
29