Bosch MIC612 Operation Manual page 67

MIC612 Thermal Camera
Setup Menu Choices:
Menu
Exit
Command Lock
Bosch Menu
Camera Setup
PTZ Setup
Edit Password
FastAddress
Advanced
Software Version
Ack and Reset Alarms
Restore All Settings
Reset All Memory
Notice!
If commands are locked and you press Focus or Iris, the camera displays the on-screen
message: "Command is Locked."
Bosch Security Systems
Description
Exits the menu.
Allows or prohibits accessing locked commands. (If password is
set, you are prompted to enter the password. The default setting is
ON.
Accesses the full configuration menu and all camera settings.
Accesses adjustable camera settings such as White Balance and
Night Mode.
Accesses adjustable pan/tilt/zoom (PTZ) settings such as tours,
scan speed, edit presets, limit stops, recording, and AutoPivot
settings.
Changes the password.
Sets or changes a camera address.
Displays the current software versions.
Acknowledges and resets active alarms.
Restores all settings to their original default setting.
Clears all settings, including scene shots, tours, and recordings
stored in the camera memory.
On-Screen Display (OSD) Menus (Pelco Protocol) | en
Operation Manual
67
2016.03 | 2.2 | F.01U.249.416