[Cmd034] Call Development Tables - NEC NEAX 2000 IVS Command Manual

COMMAND CODE
D034
1. FUNCTION:
This command is used to assign Type of Call to the dialed digits on each Type of Call Identifying Table
Number assigned by CMD033.
2. PRECAUTION:
None
3. ASSIGNMENT PROCEDURE:
ST + D034 +
4. DATA TABLE:
1ST DATA
XXX X
Dialed digit [0–9,A,(*),
B(#)] Note 1
Call Development
Table Number (0–127)
Note 2
Note 1: The actual digits sent from a trunk should be assigned.
Note 2: This feature restricts Toll Call and International Call. (Type of Call No. 2 and No. 3 assigned by
this command.)

[CMD034] Call Development Tables

TITLE:
CALL DEVELOPMENT TABLES
1ST DATA
DE + +
(2 – 4 digits)
X1 : For assigning Type of Call
1 : C.O. Call
2 : Toll Call
3 : International Call
4
5
6 Unused
7
8
9 : Tie Line Call
ND-45669 (E)
2ND DATA
DE + + EXE
(2 – 4 digits)
2ND DATA
CMD034
Initial Data
:
REMARKS
CHAPTER 3
Page 405
Revision 2.0