[Cm29] Numbering Plan Tenant Group - NEC NEAX 2000 IVS Command Manual

COMMAND CODE
29
MAT
1. FUNCTION:
When each tenant has its own numbering plan in a multiple-tenant system, all the tenants are divided into
four groups, each consisting of tenants having identical features in their numbering plans. Numbering
Plan Group data is then assigned on a tenant basis.
2. PRECAUTION:
(1) If the data is not assigned ("NONE"), then Numbering Plan Group 0 is used for all tenants.
(2) This command is included in MAT mode menu "E7" (Numbering Plan [COM02]).
3. ASSIGNMENT PROCEDURE:
ST + 29 + DE +
4. DATA TABLE:
TENANT NUMBER
00 Tenant 00
(TN No.) Tenant 63
[CM29] Numbering Plan Tenant Group
TITLE:
NUMBERING PLAN TENANT GROUP
TENANT
NUMBER
+ DE +
(2 digits)
SETTING DATA
710 Numbering Plan Group 0
711 Numbering Plan Group 1
712 Numbering Plan Group 2
713 Numbering Plan Group 3
ND-45669 (E)
DATA
+ EXE
(3 digits)
RELATED
COMMAND
CM20 Y = 0
CM20 Y = 1
CM20 Y = 2
CM20 Y = 3
CM29
REMARKS
CHAPTER 3
Page 149
Revision 2.0