NEC NEAX 2000 IVS Command Manual page 416

COMMAND CODE
D001
DATA
4 Printout function of Check-In time and Checkout time, when the
Checkout is set from a Front Desk Instrument.
5 Clearing of Check-In and setting of Room Cutoff service are exe-
cuted.
6 Designation of the number of line feeds after printing.
11 Printout function of Room Status Information, when the Checkout
is set from a Front Desk Instrument.
12 Assignment of Room Status Code to be set by Check-In operation
( + Station No. +
CHK IN
(Relevant command is CMD015, CMD016 – XX06 and
CMD031.)
13 Assignment of Maid Status Code to be set by Checkout operation
( + Station No. +
CHK IN
14 Check-In/Checkout function by a Hotel/Motel Front Desk Instru-
ment.
19 Sending the Message Waiting/Restriction Level/Wake-Up mes-
sage to PMS.
20 Data Speed for No. 0 Port
AP INITIAL
21 Stop Bit Length for No. 0 Port
AP INITIAL
22 Data Length for No. 0 Port
AP INITIAL
Note: Refer to Tables 3-1 through 3-5.
TITLE:
SYSTEM FEATURES (2)
1ST DATA
FUNCTION
)
SET
)
RESET
ND-45669 (E)
2ND DATA
0 : Not available
1 : Available
0 : Not available
1 : Available
0 : No line feed
1 : 1 line feed
10 : 10 line feeds
0 : Not available
1 : Available
0 : Invalid
1 :
Room Status Code
8 :
0 : Invalid
1 :
2 :
Maid Status Code
8 :
1 : Available (if DATA 5 = 1)
2 : Not available
1 : Not available
2 : Available
Note
0 : Not used
1 : 300 bps
2 : 1200 bps
3 : 2400 bps
4 : 4800 bps
5 : 9600 bps
Note
0 : 1 bit
1 : 1.5 bits
2 : 2 bits
Note
0 : 7 bits
1 : 8 bits
CMD001
Initial Data
:
CHAPTER 3
Page 373
Revision 2.0