NEC NEAX 2000 IVS Command Manual page 91

CM08
COMMAND CODE
08
4. DATA TABLE:
BASIC SERVICE FEATURE
012 Busy Verification
014 Attendant Loop Release
018 When the system is in night mode, an attendant (dial "0") call
from a station is automatically transferred to a specific sta-
tion.
021 Station to Station call during a C.O. outgoing connection or
outgoing call transfer.
025 MSG Display
026 Group Diversion
028 C.O. to C.O. transfer by station or attendant.
Note: This data is effective for C.O. Trunks (Ground
Start/Loop Start) which receive a release signal
from the C.O.
029 When tandem call duration passes a predetermined time, the
call is disconnected or continued.
032 When a dial-in incoming call from a tie line or DID line is ad-
dressed to vacant levels or unassigned stations, the call is
routed to a predetermined station, ATTCON or Digital An-
nouncement Trunk.
035 Toll Restriction for an outgoing call by Station Speed Dialing
feature.
036 Buzzer indication when a call remains held at the ATTCON
over a preprogrammed period of time assigned by CM41 Y =
0, Function No. 00
(Buzzer indication for Automatic Recall)
037 Select the detection method of IC GS Trunks Ring signal.
Note: This is useful when AC induction is present on GS
Trunks.
040 SMDR output for Tandem Call
043 System Speed Dialing Security (Stored Number display on
Multiline Terminal for an outgoing call by System Speed
Dialing).
CHAPTER 3
Page 72
Revision 2.0
TITLE:
BASIC SERVICE FEATURES
ND-45669 (E)
SETTING DATA
0 Not available
1 Available
0 Provided
1 Not provided
0 Not transferred
1 To transfer
(See CM51 YY = 13)
0 To restrict
1 Not restricted
0 MSG (only)
1 MSG X (X: No. of message)
0 Available (See CM16 Y = 2)
1 Not available
0 To allow
1 Not allowed
0 To disconnect
1 To continue
0 Restricted (Reorder)
1 Predetermined station, ATTCON, or
Digital Announcement Trunk assigned
by CM51 YY = 06, 07
0 Not provided
1 To provide
0 Not available
1 Available
0 Detect only, Ring cycle only
1 Detect Ring cycle and Ground Lead
0 Available
1 Not available
0 Not displayed
1 Display
Initial Data
: