[Cm81] Toll Restriction Pattern On Each Trunk Restriction Class - NEC NEAX 2000 IVS Command Manual

COMMAND CODE
81
1. FUNCTION:
Toll call restriction is controlled by combinations of the toll office code dialed and assigned station trunk
restriction class. With respect to toll call restriction, there are five kinds of trunk restriction classes:
Unrestricted (RCA), Non-Restricted-1 (RCB), Non-Restricted-2 (RCC), Semi-Restricted-1 (RCD), and
Semi-Restricted-2 (RCE). Since toll call restricting conditions for the same toll office code vary with the
trunk class, restricting patterns are made available so that toll call restriction can be executed on all
attempted outgoing toll calls.
2. PRECAUTION:
(1) Using CM00, 01 (Memory Clear), or Resident System Program, the data below is assigned
(0 = restricted, 3 = allowed).
(2) The restricted classes "00", "14" and "15" are fixed; restricted classes "01" to "13" can be changed.
TRUNK
01
RESTRICTION
CLASS
01
1 RCA 3
2 RCB 3
3 RCC 3
4 RCD 3
5 RCE 3
3. ASSIGNMENT PROCEDURE:
The following command format is used to change the standard assignment data above to meet local
requirements:
ST + 81YY + DE +
[CM81] Toll Restriction Pattern on Each Trunk Restriction Class
TITLE:
TOLL RESTRICTION PATTERN ON EACH TRUNK RESTRICTION CLASS
02 03 04 05 06
TOLL RESTRICTION PATTERN NUMBER - TRUNK RESTRICTION CLASS
02 03 04 05 06
0 3 3 3 0
0 3 3 0 0
0 3 0 0 0
0 0 0 0 0
0 0 0 0 0
TRUNK
RESTRICTION CLASS
(1 digit)
ND-45669 (E)
YY
07 08 09 10 11
07 08 09 10 11
0 0 3 3 3
0 0 3 3 0
0 0 3 0 0
0 0 0 0 0
0 0 0 0 0
DATA
+ DE +
(1 digit)
CM81
12 13 14 15 00
12 13 14 15 00
3 3 0 3 0
0 0 0 3 0
0 0 0 3 0
0 0 0 3 0
0 0 0 3 0
+ EXE
CHAPTER 3
Page 255
Revision 2.0