[Cm40] Function Of Rs-232C Interface Circuit - NEC NEAX 2000 IVS Command Manual

CM40
COMMAND CODE
40
1. FUNCTION:
This command is used to assign the function of the RS-232C interface circuits, mounted on the MP card.
The MP card has two RS-232C interface circuits, which are used for the following purposes:
(1) PN-CP00/PN-CP00-B
PORT LOCATION
NUMBER
Port 0
Port 1
(2) PN-CP03
(a) When using Built-in SMDR
PORT LOCATION
NUMBER
Port 0
Port 1
(b) When not using Built-in SMDR
PORT LOCATION
NUMBER
Port 0
Port 1
2. PRECAUTION:
None
CHAPTER 3
Page 178
Revision 2.0
[CM40] Function of RS-232C Interface Circuit
TITLE:
FUNCTION OF RS-232C INTERFACE CIRCUIT
PURPOSES
Local MAT
Remote Maintenance using external MODEM or built-
in MODEM of the MP card.
PURPOSES
Built-in SMDR
Local MAT or Remote Maintenance using external
MODEM or built-in MODEM of the MP card.
PURPOSES
Local MAT
Remote Maintenance using external MODEM or built-
in MODEM of the MP card.
ND-45669 (E)
CONNECTOR
D-SUB connector on the back
wiring board (BWB).
RS connector on the MP card
CONNECTOR
RS connector on the MP card
RS connector on the MP card
CONNECTOR
RS connector on the MP card
RS connector on the MP card