Panel Description; Front Panel - microHAM Digi Keyer II Instruction Manual

(1) – POWER
YELLOW color indicates when power is applied to the "Radio" connector.
(2) – CW SPEED
WinKey speed control. Range (MIN, MAX) is defined by software
(3) – CW
LED flashes with CW output
(4) – Q-CW/P-FSK
LED flashes with Right channel Audio output when properly configured for ON/OFF Keying
(5) – TX
Transmit Audio Level
(6) – FSK
LED flashes with FSK output. On indicates "closed" regardless of mark/space polarity.
(7) – PTT
LED lights when PTT is active
(8) – RX MAIN
Adjusts receive audio level from the main receive (left) channel.
(9) – LINE
LED lights the sound card Line input is selected and flashes when the mic input is selected.
(10) – SC
LED lights when an application opens the internal sound card for output.
(11) – RX SUB
Adjusts receive audio level from the sub- receive (right) channel.
(12) - SQL
LED light when SQUELCH is open (if supported by the transceiver)
microHAM © 2010 All rights reserved

3 - PANEL DESCRIPTION

FRONT PANEL

5