Fsk Messages Tab - microHAM Digi Keyer II Instruction Manual

DIGI KEYER II allows defining nine messages of up to 50 characters each which are stored in non-volatile
memory. Each memory may repeat with a programmable delay (loop) or call another memory (chain).
Commands which may be included in a memory are:
CR & LF: Insert Carriage Return/Line Feed
Jump to: used for looping a message or calling another message
Delay: sets the delay in seconds before looping or calling another message
Store: saves one message to DIGI KEYER II memory
Store All: saves all messages to DIGI KEYER II memory
Load from File: loads all messages from file
Save to File: saves all messages to file
Messages can also be saved and replayed also using an external keyboard attached to the Remote jack.
microHAM © 2010 All rights reserved

FSK MESSAGES TAB

33