Audio Mixer - microHAM Digi Keyer II Instruction Manual

Note: The Audio Mixer Tab is not present in Vista or Widows 7 due to operating system limitations.
The sound card configuration depends on the capability of your application software. Some software can
directly control the sound mixer controls some can not. Router's Audio Mixer tab provides the ability to
store and recall level settings to the presets for each application (or operating configuration).
Select microHAM CODEC to use the internal soundcard in DIGI KEYER II.
Router displays separate controls for the left and right Wave, Line Out (Volume) and Line In channels.
DIGI KEYER II uses the left channel for all audio output. The right channel is used by the P-FSK/Q-CW
detector.
NOTE: Windows can reassign sound cards "on the fly" and Router may not always select the correct mixer
if you have more than one soundcard in your system. To confirm that the proper mixer has been
assigned, click the Get ID button and confirm that microHAM CODEC is selected. If the correct
soundcard is not selecetd, restart Router.
microHAM © 2010 All rights reserved
AUDIO MIXER TAB
27