Panel Description; Front Panel - microHAM DXP Manual

1. PWR
POWER LED lights when USB power is applied. Flashing in Stand-by.
2. CW
LED flashes with CW output.
3. FSK
LED flashes with FSK output.
4. SPEED
CW speed control. Range (MIN, MAX) is defined by WinKey software.
5. PTT
LED lights when PTT from logger or digital modes program is active.
6. TX AUDIO
LED lights when TX Audio from logger or digital modes program is active.
7. RX AUDIO
LED lights when RX Audio to logger or digital modes program is active.
8. TX
Sets display and right knob to adjust TX driving level. Invokes and closes SETUP menu
when pushed together with right RX button. Left button for navigation in the setup.
9. DISPLAY
10. RX
Sets display and right knob to adjust RX level. Invokes and closes SETUP menu when
pushed together with left TX button. Right button for navigation in the setup.
11. KNOB
Multipurpose knob for adjusting TX and RX audio level. Pushing toggles between MAIN
and SUB RX level, sets parameters in the setup.
microHAM © 2019 All rights reserved

2 - PANEL DESCRIPTION

Front Panel

4