Hitachi GR2000 Series Configuration Commands page 351
Hitachi gigabit router configuration guide
Hide thumbs
Also See for GR2000 Series:
- Installation manual (18 pages) ,
- Installation manual (410 pages)
Table of Contents
Advertisement
Description:
Default:
Range of Value:
Description:
Default:
Range of Value:
Description:
Default:
Description:
Description:
Default:
Range of Value:
Description:
Default:
Range of Value:
Description:
Default:
Range of Value:
Description:
Default:
GR2K-GA-0014
Ver. 07-02
Specifies the authentication key number used for accessing
the peer server. The key number must be the one defined by
the
authentication-key parameter.
No authentication key.
1–4294967295 in decimal.
Specifies the NTP version.
3
1, 2, or 3
Grants privilege to the subject peer server among multiple peer
servers defined.
No privilege
This set of parameters specifies the time server.
Specifies the IP address of the target server as a time server.
Undefined (mandatory input)
IP address in dot notation or host name defined with hosts
object.
Specifies the authentication key number used for accessing
the time server. The key number must be the one defined by
the
authentication-key parameter.
No authentication key
1–4294967295 in decimal
Specifies the NTP version
3
1, 2, or 3
Grants privilege to the subject time server among multiple
time servers defined.
No privilege
Operation Management Information
4-21
Advertisement
Table of Contents
