Hitachi GR2000 Series Configuration Commands page 252

Hitachi Gigabit Router GR2000 Series Enhanced Version Configuration Commands, Vol. 2
Input Format
Settings
Changing settings:
Deleting settings:
Displaying settings:
Parameters
{ <Line Name> | <DLCI Name>
<Peer Name> }
Description:
Default:
Description:
Default:
Range of value:
Description:
Default:
Range of value:
1-210
This parameter sets the relevant interface name established in
the bridge interface settings. (Before entering this command,
establish the bridge interface settings.) Only a WAN interface
can be specified. The HDLC passthrough QoS information of
LAN and ATM interfaces operates with the value set using
qos-bridge.
Cannot be omitted
This parameter sets the output priority class. In the case of
output priority control, used as the output priority class. In
the case of bandwidth and round-robin, used as a queue
number.
4
1-8
This parameter sets the queuing priority class.
4
1-4
| <Group Name> | <Timeslot Name> |
GR2K-GA-0014
Ver. 07-02