Midi; Control Change] Tab - Yamaha DME64N Owner's Manual

Chapter 3 Main Panel Window

MIDI

When you click the [MIDI] command on the [Tools] menu, the "MIDI" dialog box is displayed. Here you
can make remote control and other settings.
NOTE
Does not apply to SP2060 units
Names and Functions
Common to All Tabs
DME
From the list, select the DME where you will be making settings.
[OK] Button
Applies any setting changes and closes the window.
[Cancel] Button
Closes the window without changing any settings.

[Control Change] Tab

Assigns components to control change for each DME. You can change DME parameters by sending
control change messages from external equipment.
You can assign to control change numbers 1-31, 33-95, and 102-119.
NOTE
Because control change numbers 0 and 32 are used for bank select MSB, numbers 96-101 are RPN/NRPN related, and
120-127 are used for mode messages, they cannot be used for component assignment.
110 DME Designer Owner's Manual