Yamaha DME64N Owner's Manual page 72

Chapter 3 Main Panel Window
Configuration
Displays the configuration name. If the scene has not been stored, a hyphen (-) will be displayed.
Edit Security
Displays the scene edit security levels. Clicking here will display a list where you can change these
security levels. Only levels at or below the security level of the currently logged on user are
displayed in the list. When a user is created, these settings are the same as the new user's security
level, but scene store and edit settings can be set lower.
Recall Security
Displays the scene recall security level. Clicking here will display a list where you can change the
security level. Only levels at or below the security level of the currently logged on user are
displayed in the list. When a user is created, these settings are the same as the new user's security
level, but the scene recall setting can be set lower.
Fade
It sets whether fade is applied (ON) or not (OFF) when a scene is recalled.
NOTE
When "ON" the faders in fader components will "fade" to their new settings according to the specified fade mode and
fade time when a scene is recalled. This only applies to fader components.
NOTE
The fade function cannot be simulated in DME Designer.
Fade Mode
Sets the fade mode. You can select "All" or "Selected."
If you select "All," all channels using Fader components in their configuration will be affected. Even
when multiple components are used, all channels are targeted. If you select "Selected," the only
channels affected will be those for which the Fade switch in the component editor has been set to
ON.
NOTE
The Fade switch for each channel is set to OFF by default. The fade effect will not be applied, even if Fade=ON and
Fade Mode=Selected is selected. To apply the effect, you must set the Fade switch to ON for the channels where you
need it.
72 DME Designer Owner's Manual