Clock - Yamaha DME64N Owner's Manual

Clock

When you click the [Clock] command on the [Hardware] menu, the "Clock" dialog box is displayed.
Here you can set the DME internal clock. This can be set only when online. The default is the computer
date and time.
Set the date in the left box and the time in the right box. You can change the numbers using the [ ]
and [ ] at the right of the boxes.
NOTE
Does not apply to SP2060 units
[OK] Button
Applies any setting changes and closes the window.
[Cancel] Button
Closes the window without changing any settings.
NOTE
You can close the dialog box using the Close button, or by pressing <Esc> or <Alt>+<F4>.
Chapter 3 Main Panel Window
DME Designer Owner's Manual 157