Yamaha DME64N Owner's Manual page 400

Chapter 6 Component Guide
1
2
3
4
5
6
7
8
9
)
!
400 DME Designer Owner's Manual
Section Parameter
Input Channels Phase
Gate Indicator
Threshold
Hold
Decay
Solo
On
Fader
Master Output Gain Correct
On
Master
Setting Range
ON/OFF
--
-54 dB to ±0 dB
44.1 kHz: 110 m to 2.13 s
48 kHz: 101 m to 1.96 s
88.2 kHz: 55.1 m to 1.06 s
96 kHz: 50. 6m to 981 m
44.1 kHz: 110 m to 46 s
48 kHz: 101 m to 42.3 s
88.2 kHz: 55 m to 23 s
96 kHz: 51 m to 21.1 s
ON/OFF
ON/OFF
- to +10 dB
ON/OFF
ON/OFF
- to +10 dB
Function
Reverses the phase of each channel's
input signal.
When the gate is open, the light turns
green. When the gate is closed, the light
turns yellow.
Sets the threshold value for each gate.
Sets the gate hold time.
The setting range may vary, depending
on the operating frequency.
Sets the speed for closing the gate.
The setting range may vary, depending
on the operating frequency.
Turns solo ON. If Solo is engaged for
even one channel, all non-Solo channels
will be muted.
Turns ON each channel's input.
Sets the input signal level for each
channel.
The output gain will be adjusted
according to the number of channels
being mixed.
Turns ON each channel's output.
Sets the output signal level.