Yamaha DME64N Owner's Manual page 11

• An Undo/Redo function is now available when using the design mode. It can undo the most
recent operation (control movement/resize/deletion).
Changes from V1.1 to V1.2
Main Panel Window
• The synchronization algorithm has been refined for faster synchronization.
• Synchronization now can be executed from DME to DME Designer without any break in the
sound.
• In the following cases, synchronization can be executed from DME Designer to DME without any
break in the sound:
The second or later synchronization after starting DME Designer* and when differences in data
between the DME and DME Designer are limited to parameters within components, AD824/
AD8HR/DME24N AD/DA setting data, or MY card setting parameters.
* If the file was saved when DME Designer was closed, there will be no break in sound even in the first
synchronization after saving.
• Compile speed has been increased.
Up to three times faster when AutoDelayCompensation is turned On.
Up to two times faster when AutoDelayCompensation is turned Off.
• Synchronization is possible when no MY card or a different MY card is installed in the DME unit
(a confirmation dialog will appear).
• An option to automatically close the dialog after synchronization has been added.
• A progress bar has been added to the Synchronization dialog.
• A message appears to warn when synchronization will cause muting.
• The following operations can be performed while on line:
- Scene storage.
- Scene name changes.
- Fade ON/OFF and Fade Mode changes.
- Fade time changes.
- Parameter link setting changes.
• When a scene store is executed, that scene becomes the current scene.
• Wave files can be saved as DME data files, and are included in import/export operations.
(page 37)
• Wave files can be saved in the Wav file library.
• Event Log events can be output via GPI.
• The on-line indicator appears as a button which can be used to switch between on-line and
off-line.
• Scene edits cause the EDIT indicator to appear.
• An auto file save function (Auto Save, post synchronization) has been added.
• Different zones can be specified for use by different users.
• Scene parameters related to User Defined Button, Program Change, GPI In and GPI Out can be
set via the Scene Manager.
• [Select All] and [Clear All] buttons have been added to the Scene Manager Recall Safe dialog.
(page 74)
• User Control can be created for individual users as well as security levels.
• A Remote Control Setup List has been added.
This list can be used to make detailed settings for a new software protocol that allow the DME to
be controlled from AMX, Crestron, and similar devices.
(page 50)
(page
(page 69)
(page 48)
(page
70)
(page 125)
Getting Started
(page
(page 42)
(page 63)
137)
(page 78)
DME Designer Owner's Manual
43)
11