Cobranet Input And Output - Yamaha DME64N Owner's Manual

Chapter 6 Component Guide

CobraNet Input and Output

The DME8i-C/DME8o-C/DME4io-C configuration window includes [CobraNet Input] and [CobraNet
Output] blocks.
CobraNet
Either double-click [CobraNet Input]/[CobraNet Output] or select [Open CobraNet Editor] from the
contextual menu that appears when a component is right-clicked to open the editor.
CobraNet Input/Output Component Editor
1
2
3
4
5
6
7
* Select "Disable" if you intend to make settings via the CobraNet network using the CobraNet Manager, for example. In such
cases selecting "Enable" may result in incorrect settings.
452 DME Designer Owner's Manual
1
2
3
4
5
6
7
Section Name/Parameter
Setting from this Window
High Sampling Input Format
Mode
Output Format
Bundle Input
Number
Output
Serial Rx
Channel
Tx
Properties Bit Length
Latency
Advanced
Range
Disable/Enable When "Disable" is selected settings made via
the CobraNet network take priority. When
"Enable" is selected settings made from the
DME Designer take priority.*
Double Channel Selects the format for 88.2/96 kHz sampling
Single rates.
Linked to Output Format.
Double Channel Selects the format for 88.2/96 kHz sampling
Single rates.
Linked to Input Format.
0 ~ 65279 Specifies the input bundle number.
0 ~ 65279 Specifies the output bundle number.
OFF, 1 ~ 15 Specifies the serial receive channel.
OFF, 1 ~ 15 Specifies the serial transmit channel.
Bit Off Specifies the output bit rate.
16bit Output is muted when "Bit Off" is selected.
20bit
24bit
5.33ms Specifies the latency.
2.67ms
1.33ms
- Opens the "Advanced Settings" window.
Function