Operation Mode And Design Mode - Yamaha DME64N Owner's Manual

Operation Mode and Design Mode

There are two modes for the user control editor/user module editor and the component editor:
"operation mode" and
mode you lay out controls.
You can switch between operation mode and design mode using the context menu that is displayed
when you right-click in the user control editor/user module editor or component editor.
The [Design Mode] command switches the design mode between ON and OFF. A checkmark
appears when the design mode is turned ON. If you click in the context menu when the checkmark is
present, design mode will turn OFF, and the edit window will return to operation mode.
NOTE
Only users for whom the [Operation Security]
design mode ON.
NOTE
You can select controls in the component editor so that you can copy them into the user control editor/user module editor.
When you want to select multiple objects, hold down the <Ctrl> key as you click each new object you want to select.
"design mode." In operation mode you adjust parameters, while in design
Switches
between
operation mode
and design
mode
[Edit] checkbox in the "Security" dialog box has been checked can turn the
Chapter 5 Components
DME Designer Owner's Manual 331