Yamaha DME64N Owner's Manual page 209

Chapter 4 Designer
[Store Component Library]
Saves the component parameters. Click to display the Store dialog. If you then save without
changing the folder, the parameters will be added to the library.
Refer to "Library" on page 337 for more information.
[Add Component to Component Link]
Creates component link.
Refer to "Creating Component Links" on page 342 for more iformation.
[Properties]
Displays the "Component Properties" dialog box.
Component Properties
Here you can set properties for each component. If multiple examples of the same component type
are arranged on a single sheet, changing the properties of a single component does not change
the others.
To display the "Component Properties" dialog box, select a component object, then click the
[Properties] command on the [Edit] menu.
[Label] Box
You can enter up to 100 English characters to display over the object.
[Width] Box
Specifies the width of the object in pixels.
[Height] Box
Specifies the height of the object in pixels.
[Style]
Sets the style of the object. From the list, select [Plain], [Raised], or [Sunken].
[Label Font] Button
Sets the font for the label. Clicking here displays the "Select Font" dialog box.
For information about the "Select Font" dialog box, see page 236.
DME Designer Owner's Manual 209