Chapter 3 Main Panel Window
MIDI
When you click the [MIDI] command on the [Tools] menu, the "MIDI" dialog box is displayed. Here you
can make MIDI input/output port, remote control, and other settings.
[Setup] Tab
Sets the DME MIDI channels along with program change, control change, and parameter change.
[DME]
From the list, select the DME where you will be making settings.
MIDI CH
Sets the MIDI channel. This number is also used as the Parameter Change Device ID.
[Tx]
Select the MIDI transmit channel from the list.
[Rx]
Select the MIDI receive channel from the list.
Program Change/Control Change/Parameter Change
Sets transmit (Tx), receive (Rx), OMNI, and Echo for program change/control change/parameter
change. When ON, clicking turns this OFF. When OFF, clicking turns this ON. When OMNI is [ON]
channel messages are received regardless of the receive channel setting. When ECHO is [ON] the
input data is "echoed" (re-transmitted) via the output port that corresponds to the input port via
which it was received.
Detailed settings for program change, control change, and parameter change are made on the
[Program Change] tab, the [Control Change] tab, and the [Parameter Change] tab.
90
DME Designer Owner's Manual