Yamaha DME64N Owner's Manual page 414

Chapter 6 Component Guide
One Input to All Outputs
When you click the input channel number on the left side of the matrix, the [Matrix Mixer - One Input
to All Outputs] editor window opens. One input channel and all output channels are displayed. The
input channel is the one you have clicked on in the delay mixer component editor.
1
2
3
4
5
6
7
8
9
)
!
Input Channel Switching
The [Matrix Mixer - One Input to All Outputs] editor window displays the input channel for the
channel number clicked on in the matrix mixer component editor.
The [Channel] buttons in the [Input] section of the [Matrix Mixer - All Inputs to One Output] editor
window switch the channel group that is displayed in the window.
If you make the matrix mixer component editor active while the [Matrix Mixer- One Input to All
Outputs] editor window is displayed, and then click another input channel, that channel will be
displayed in the [Matrix Mixer - One Input to All Outputs] editor window.
One [Matrix Mixer - One Input to All Outputs] editor window is displayed for each matrix mixer
component editor.
414 DME Designer Owner's Manual
1
2
6
3
7
4
5
Section Parameter
Input Channel
Phase
Level
Solo
On
Bus Send Level Level
On
Block On
Off
Nominal
Minimum
Setting Range
-- Displays the selected input channel. Select
another channel from a menu.
ON/OFF Reverses the phase of the input signal.
- to +10 dB Sets the input signal level.
ON/OFF Turns solo ON. If Solo is engaged for even
one channel, all non-Solo channels will be
muted.
ON/OFF Turns input ON.
- to +10 dB Sets the signal level for each output channel.
ON/OFF Turns ON the output for each output channel.
-- Turns ON all channel outputs. When turned
ON, the [On] button lights up.
-- Turns OFF all channel outputs.
-- Resets all output signal levels, making them
0 dB.
-- Resets all output signal levels, making them
- dB.
8
9
)
!
Function