Port-Channel Min-Links; Show Interfaces Port-Channel - Dell PowerEdge M420 Reference Manual

port-channel min-links

Use the port-channel min-links command in Interface Configuration (port-
channel) mode to set the minimum number of links that must be up in order
for the port channel interface to be declared up. Use the no form of the
command to return the configuration to the default value (1).
Syntax
port-channel min-links
no port-channel min-links
Parameter Description
Parameter
min-links
Default Configuration
This command has no default configuration.
Command Mode
Interface Configuration (port-channel) mode
User Guidelines
This command has no user guidelines.

show interfaces port-channel

Use the show interfaces port-channel command to show port-channel
information.
Syntax Description
show interfaces port-channel [port-channel
index ] — Number of the port channel to show. This parameter is
• [
optional. If the port channel number is not given, all the channel groups
are displayed. (Range: Valid port-channel number, 1 to 48)
586
Port Channel Commands
1-8
Description
The minimum number of links that must be active before the
link is declared up. Range 1-8. The default is 1.
port-channel-number ]