Show Ip Igmp - Dell PowerEdge M420 Reference Manual

console(config-if-vlan15)#ip igmp version 2

show ip igmp

Use the show ip igmp command in Privileged EXEC mode to display system-
wide IGMP information.
Syntax
show ip igmp
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays system-wide IGMP information.
console#show ip igmp
IGMP Admin Mode............................. Enabled
IGMP Router-Alert check..................... Disabled
IGMP INTERFACE STATUS
Interface Interface-Mode Operational-Status
--------- -------------- ----------------
vlan 3 Enabled Non-Operational
882
IGMP Commands