Dns-Server (Ipv6 Dhcp Pool Config); Domain-Name (Ipv6 Dhcp Pool Config) - Dell PowerEdge M420 Reference Manual

FILE LOCATION: C:\My Documents\ActiveProjects\2CSPC7000-SWUM400 Dell Zeiss CLI
Examples
The following examples clears DHCPv6 statistics for VLAN 11.
console#clear ipv6 dhcp interface vlan 11 statistics\

dns-server (IPv6 DHCP Pool Config)

Use the dns-server command in IPv6 DHCP Pool Configuration mode to set
the IPv6 DNS server address which is provided to a DHCPv6 client by the
DHCPv6 server. DNS server address is configured for stateless server support.
Syntax
ipv6-address
dns-server
ipv6-address
no dns-server
Parameter Description
Parameter
ipv6-address
Default Configuration
This command has no default configuration.
Command Mode
IPv6 DHCP Pool Configuration mode
User Guidelines
This command has no user guidelines.

domain-name (IPv6 DHCP Pool Config)

Use the domain-name command in IPv6 DHCP Pool Configuration mode to
set the DNS domain name which is provided to a DHCPv6 client by the
DHCPv6 server. DNS domain name is configured for stateless server support.
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 3 / 1 0 / 1 1 - F O R P R O O F O N LY
844
DHCPv6 Commands
Guide\working\DHCPv6.fm
Description
Valid IPv6 address.