Dell PowerEdge M420 Reference Manual page 112

Command
dot1x max-users
dot1x port-control
dot1x re-authenticate
dot1x reauthentication
dot1x system-auth-control
monitor
dot1x timeout guest-vlan-
period
dot1x timeout quiet-period Sets the number of seconds the switch remains
dot1x timeout re-
authperiod
dot1x timeout server-
timeout
dot1x timeout supp-
timeout
dot1x timeout tx-period
show dot1x
show dot1x authentication-
history
112
Command Groups
Description
Sets the maximum number of clients supported
on the port when MAC-based 802.1X
authentication is enabled on the port.
Enables manual control of the authorization
state of the port.
Manually initiates a re-authentication of all
802.1x-enabled ports or a specified 802.1X
enabled port.
Enables periodic re-authentication of the client. IC
Enables 802.1X globally.
Sets the number of seconds that the switch
waits before authorizing the client if the client
is a dot1x unaware client.
in the quiet state following a failed
authentication attempt.
Sets the number of seconds between re-
authentication attempts.
Sets the number of seconds the switch waits for
a response from the authentication server
before resending the request.
Sets the number of seconds the switch waits for
a response to an EAP-request frame from the
client before retransmitting the request.
Sets the number of seconds the switch waits for
a response to an EAP-request/identify frame
from the client before resending the request.
Displays 802.1X status for the switch or the
specified interface.
Displays the dot1x authentication events and
information during successful and unsuccessful
dot1x authentication processes.
a
Mode
IC
IC
PE
GC
IC
IC
IC
IC
IC
IC
PE
PE