Dell PowerEdge M420 Reference Manual page 104

Command
match srcl4port
match vlan
mirror
police-simple
policy-map
redirect
service-policy
show class-map
show classofservice dotlp-
mapping
show classofservice ip-
dscp-mapping
show classofservice trust
show diffserv
show diffserv service
interface
show diffserv service
interface port-channel
104
Command Groups
Description
Adds to the specified class definition a match
condition based on the source layer 4 port of a
packet using a single keyword, a numeric
notation, or a numeric range notation.
Adds to the specified class definition a match
condition based on the value of the layer 2
VLAN Identifier field.
Mirrors all the data that matches the class
defined to the destination port specified.
Establishes the traffic policing style for the
specified class.
Establishes a new DiffServ policy or enters
policy map configuration mode.
Specifies that all incoming packets for the
associated traffic stream are redirected to a
specific egress interface (physical port or port-
channel).
Attaches a policy to an interface in a particular
direction.
Displays all configuration information for the
specified class.
Displays the current Dot1p (802.1p) priority
mapping to internal traffic classes for a specific
interface.
Displays the current IP DSCP mapping to
internal traffic classes for a specific interface.
Displays the current trust mode setting for a
specific interface.
Displays the DiffServ General Status
information.
Displays policy service information for the
specified interface and direction.
Displays policy service information for the
specified interface and direction.
a
Mode
CMC
CMC
PCMC
PCMC
GC
PCMC
GC or
IC
PE
PE
PE
PE
PE
PE
PE