Show Lldp Local-Device - Dell PowerEdge M420 Reference Manual

Examples
This example show how the information is displayed when you use the
command with the all parameter.
console#show lldp interface all
Interface Link Transmit Receive
--------- ---- -------- -------- -------- ------- ----
1/0/1 Up
1/0/2 Down Enabled
1/0/3 Down Disabled Disabled Disabled 1,2
TLV Codes: 0 – Port Description, 1 – System Name, 2 – System
Description, 3 –
System Capability
console# show lldp interface 1/0/1
Interface Link Transmit Receive
--------- ---- -------- -------- -------- ------- ----
1/0/1 Up
TLV Codes: 0 – Port Description, 1 – System Name, 2 – System
Description, 3 – System Capability

show lldp local-device

Use the show lldp local-device command in Privileged EXEC mode to display
the advertised LLDP local data. This command can display summary
information or detail for each interface.
Syntax
show lldp local-device {detail
• detail — includes a detailed version of remote data.
interface — Specifies a valid physical interface on the device. Specify
•
either gigabitethernet
• all — Shows lldp local device information on all interfaces.
Enabled Enabled
Enabled
Enabled Enabled
interface
unit/slot/port
Notify TLVs
Enabled 0,1,2,3
Disabled
Notify TLVs
Enabled 0,1,2,3
interface
| | all}
or tengigabitethernet
LLDP Commands
Mgmt
Y
Y
N
Mgmt
Y
unit/slot/port
.
543