Interface Port-Channel - Dell PowerEdge M420 Reference Manual

on — Forces the port to join a channel without LACP.
•
auto — Forces the port to join a channel with LACP.
•
Default Configuration
This command has no default configuration.
Command Mode
Interface Configuration (Ethernet) mode
User Guidelines
This command has no user guidelines.
Example
The following example shows how port 1/0/5 is configured to port-channel 1
without LACP.
console(config)# interface gigabitethernet 1/0/5
console(config-if-1/0/5)# channel-group 1 mode on

interface port-channel

Use the interface port-channel command in Global Configuration mode to
configure a port-channel type and enter port-channel configuration mode.
Syntax
interface port-channel
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
578
Port Channel Commands
port-channel-number