Class Name..................................... ipv4
Class Type..................................... All
Class Layer3 Protocol.......................... ipv4
Match Criteria
---------------------------- -------------------------------------
Source IP Address
console#show class-map stop_http_class
Class Name..................................... stop_http_class
Class Type..................................... All
Class Layer3 Protocol.......................... ipv6
Match Criteria
---------------------------- -------------------------------------
Source IP Address
Source Layer 4 Port
show classofservice dot1p-mapping
Use the show classofservice dot1p-mapping command in Privileged EXEC
mode to display the current Dot1p (802.1p) priority mapping to internal
traffic classes for a specific interface.
Syntax
show classofservice dot1p-mapping [{gigabitethernet
port-channel-number | tengigabitethernet unit/slot/port }]
channel
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
2.2.2.2 (255.255.255.0)
2001:DB8::/32
80(http/www)
Values
Values
unit/slot/port
| port-
QoS Commands
635