Dell PowerEdge M420 Reference Manual page 475

Parameter Description
This command does not require a parameter description.
Default Configuration
This command has no default configuration.
Command Mode
User EXEC, Privileged EXEC mode
User Guidelines
This command has no user guidelines.
The command provides the following information.
Term
Address Conflict
Detection Status
Last Conflicting IP
Address
Last Conflicting
MAC Address
Time Since Conflict
Detected
Example
console#show ip address-conflict
Address Conflict Detection Status...Conflict Detected
Last Conflicting IP Address.........10.131.12.56
Last Conflicting MAC Address........00:01:02:04:5A:BC
Time Since Conflict Detected........5 days 2 hrs 6 mins 46 secs
console#show ip address-conflict
Description
Whether the switch has detected an address conflict on any IP
address. Set to Conflict Detected if detected, No Conflict
Detected otherwise.
The IP address that was last detected as conflicting on any
interface.
The MAC Address of the conflicting host that was last detected
on any interface.
The time in days, hours, minutes, and seconds since the last
address conflict was detected.
IP Addressing Commands
475