Denial Of Service - Dell PowerEdge M420 Reference Manual

Command
update bootcode
write
a. For the meaning of each Mode abbreviation, see Mode Types on page 77.

Denial of Service

Command
dos-control firstfrag
dos-control icmp
dos-control l4port
dos-control sipdip
dos-control tcpflag
dos-control tcpfrag
ip icmp echo-reply
ip icmp error-interval
ip unreachables
ip redirects
ipv6 icmp error-internal
ipv6 unreachables
146
Command Groups
Description
Updates the bootcode on one or more switches. PE
Copies the running configuration image to the
startup configuration.
Description
Enables Minimum TCP Header Size Denial of
Service protection.
Enables Maximum ICMP Packet Size Denial of
Service protections.
Enables L4 Port Denial of Service protection.
Enables Source IP Address = Destination IP
Address (SIP=DIP) Denial of Service
protection.
Enables TCP Flag Denial of Service
protections.
Enables TCP Fragment Denial of Service
protection.
Enables or disables the generation of ICMP
Echo Reply messages.
Limits the rate at which IPv4 ICMP error
messages are sent.
Enables the generation of ICMP Destination
Unreachable messages.
Enables the generation of ICMP Redirect
messages.
Limits the rate at which ICMPv6 error messages
are sent.
Enables the generation of ICMPv6 Destination
Unreachable messages.
a
Mode
PE
a
Mode
GC
GC
GC
GC
GC
GC
GC
GC
IC
IC
GC
IC