Area Nssa Translator-Role - Dell PowerEdge M420 Reference Manual

Syntax
area-id
area nssa no-summary
area-id
no area
area-id — Identifies the OSPF NSSA to configure. (Range: 0–4294967295)
•
Default Configuration
This command has no default configuration.
Command Mode
Router OSPF Configuration mode.
User Guidelines
This command has no user guidelines.
Example
The following example configures the NSSA so that summary LSAs are not
advertised into the NSSA.
console(config-router)#area 20 nssa no-summary

area nssa translator-role

Use the area nssa translator-role command in Router OSPF Configuration
mode to configure the translator role of the NSSA.
Syntax
area-id
area nssa translator-role {always | candidate}
area-id
no area
area-id — Identifies the OSPF NSSA to configure. (Range: IP address or
•
decimal from 0–4294967295)
• always — The router assumes the role of the translator when it becomes a
border router.
• candidate — The router to participate in the translator election process
when it attains border router status.
1074
OSPF Commands
nssa no-summary
nssa translator-role