Utility Commands; Show Vrrp Interface - Dell PowerEdge M420 Reference Manual

Command

show vrrp interface

show vrrp interface brief
show vrrp interface stats
Pingable VRRP Commands
ip vrrp accept-mode
show ip vrrp interface
a. For the meaning of each Mode abbreviation, see Mode Types on page 77.

Utility Commands

Auto-Install
Command
boot auto-copy-sw
boot auto-copy-sw allow-
downgrade
boot host autoreboot
boot host autosave
boot host dhcp
140
Command Groups
Description
Displays all configuration information and
VRRP router statistics of a virtual router
configured on a specific interface.
Displays information about each virtual router
configured on the switch.
Displays the statistical information about each
virtual router configured on the switch.
Enables the VRRP Master to accept ping
packets sent to one of the virtual router's IP
addresses.
Displays the configured value for Accept Mode. UE or
Description
Enables or disables Stack Firmware
Synchronization.
Enables downgrading the firmware version on
the stack member if the firmware version on the
manager is older than the firmware version on
the member.
Enables rebooting the device (no administrative
intervention) when the auto-image is
successfully downloaded.
Enables/disables automatically saving the
downloaded configuration on the switch.
Enables/disables Auto Config on the switch.
a
Mode
UE or
PE
PE
PE
IC
PE
a
Mode
GC
GC
GC
GC
GC