Section Two - Installing The Unit; Safety Considerations; Ordering Information - NorthStar 951X Installation Manual

SECTION TWO - Installing the unit

Safety considerations

Ordering information

951/952 INSTALLATION MANUAL Revision B
T
his chapter includes all the information needed to install the unit. It
begins with a review of the system components and then provides infor-
mation on basic installation and powering on the unit. The rest of this
chapter describes how to wire the unit, install the antenna, and trouble-
shoot. Proper installation of the Northstar 951/952 is of utmost impor-
tance to accurately receive and effectively use GPS signals under a wide
variety of weather conditions.
Be sure to turn the power off at the main switchboard before starting the
installation. Further, it is highly recommended that you post a notice by
this switch telling others to keep power off while you're performing the
installation. If power is left on or turned on during the installation, then fire,
electrical shock, or other serious injury may occur.
Be sure to ground the equipment in order to prevent electrical shock and
mutual interference.
Be sure that the voltage of the power supply is compatible with the unit's
voltage rating, which can be found on the label at the rear of the unit. Con-
necting to the wrong power supply can result in fire or damage to the
equipment.
Be sure to use the proper fuse. Using the incorrect fuse can result in fire or
damage to the unit.
Keep the following safe compass distance from the unit: 1.0m standard,
0.8m steering.
Be sure that the 951/952 doesn't interfere with any of the on-board sys-
tems. Check all other systems to ensure that their performance doesn't
degrade when the unit is turned on.
To order spare parts or replacement/missing parts, call the Northstar Sales
Department at 978-897-0770.
SECTION TWO - Installing the unit
WARNING!
CAUTION!
Page 5