GE GL317D Instruction Manual page 98

Installing terminals
Process
Comment
03- 2017
Installation
Installing terminals
with preparation of contact surfaces
Assemble immediately the terminals (1) on the interrupting chambers (2) after
preparation of contact surfaces. Fasten the terminals using screws (3); use
CONTACT GREASE to seal the screws.
2
x 4
3
H M12- 45
5 daN.m
D The electrical resistance value of the assembly should be :
D Before installing H.V. connectors, prepare the contact surfaces in the
same way.
GE Information
R  2
2
2
1
L31- 736EN/03
4/4