Table of Contents
Advertisement
Storage
06- 2017
Packaging - Shipping and storage
Packaging - Identification - Storage
Centralizing cubicle
ANY CHANGE OF LOCATION OF THE APPARATUS (EVEN AFTER
COMMISSIONING) SHOULD BE DONE AT A REDUCED PRESSURE OF
0.03 MPa.
GE Information
The centralizing cubicle should be
stored in the same place as the
circuit- breaker and the operating
device, these three sub- assemblies
being inseparable.
S In order to prevent corrosion
damage
due
to
formation
condensation, it is mandatory that the
heating circuit be switched on. Put
vetically the centtralizing cubicle for
that air can enter through the vents.
L22- 014EN/05
of
5/6
Advertisement
Chapters
Table of Contents
