Nokia Alfaskop TT/386 User Manual page 76

Help
Checking Electrical Connections
The System Unit Does Not Start when Turned On
1. Make sure that the power switch on the back panel of the
system unit is in "1" position.
2. Turn the system unit off and then on again.
3. If the system unit does not start, turn it off.
4. First unplug the system unit power cord from the wall outlet,
then plug it back in.
5. Check that the system unit's power cable is properly connected
both to the system unit and the wall oudet.
6. If still nothing happens, have the system unit serviced.
The Monitor Does Not Start when Turned On
It is assumed that the system unit starts when the power is turned on.
1. Make sure that the monitor's power switch is set to the ON
position.
2. If it is on, turn both the monitor and the system unit off.
3. Check that the monitor's power cable is properly connected to
the system unit's power outlet.
4. Unplug the monitor's power cable from the system unit.
5. Plug the monitor's power cable into the system unit.
6. Turn the system unit on.
7. Turn the monitor on.
8. If the monitor still does not start, have the monitor serviced.
4-8