Table of Contents
Advertisement
Installation
Ignore the error message(s) and press the F1 key on the
keyboard.
When you press the F1 key, one beep is heard and the message
Waiting . .
appears on the screen.
5.
Adjust the monitor's contrast (and brightness) control(s) for
your eye comfort.
6.
Get the Setup and Maintenance
diskette and insert it in
diskette drive A (drive 1).
7.
After a short while the Setup menu is presented on the screen.
_ _ _
—
— =
SETUP V2.1C -----
----------
S E T U P
M E N U
20.04.1988
13.29.26
Set date
Set time
D i s k e t t e d r i v e 1 : 1.44 MB
D i s k e t t e d r i v e 2 : None
Hard d i s k 1 : Type 14
Hard d i s k 2 : None
Base memory s i z e : 640 kB
Expansion memory s i z e : 3072 k b
Video mode: No video
Math coprocessor: A v a i l a b l e
S e c u r i t y menu
Enhancement menu
Store and e x i t
Use arrows to s e l e c t o p t i o n
<H>= Help
<Enter> = Enable entry
<Esc> = E x i t w i t h o u t changes
< ! >
= Execute e x t e r n a l conmand
In the Setup menu you can set the date and time of the system unit's
clock and calendar if so is necessary. You can also enter your
specific configuration parameters, if you have installed any options
inside the system unit.
When you start, the Set Date option is highlighted, indicating that
this option is selected. You can move the highlight to select other
options by means of the arrow keys (<— , "f, —■> and J,).
2-7
Advertisement
Chapters
Table of Contents
