Powering Off - Nokia Alfaskop TT/386 User Manual

Operation
Powering Off
You should always finish the operation of a program in accordance
with the instructions given in the manual for the program. If you do
so, the DOS prompt, for example C>, is presented on the screen.
1.
Check that the diskette drive is empty.
2.
If the monitor has a power switch, turn it off.
3. Switch off the power from the system unit by turning the key
on the front panel to
STOP
position. This will be quite enough
- you do not need to press the power switch on the back panel
to
0
position.
4.
If your system includes any additional units, these can be
turned off now. Refer to the operating instructions for the
equipment for the correct procedures.
3-10