Nokia Alfaskop TT/386 User Manual page 56

Installation
Installing Application Software
Application programs are delivered on diskettes. To install an
application program on the hard disk, follow the instructions in the
manual supplied with the program.
However, to install an application program that is copy-protected,
you must run the Setup program before you can install the program.
Do as follows:
1.
Turn on power to the system.
2. Insert the Setup and Maintenance diskette in diskette drive A
(drive 1).
3.
Reset the system by pressing
Ctrl-Alt-Delete.
4.
After a few seconds the Setup menu is displayed.
— SETUP V2.1C
■
—
■
S E T U P M E N U 20.04.1988 13.29.26
Set date
Set t i m e
D i s k e t t e d r i v e 1 : 1 . 4 4 MB
D i s k e t t e d r i v e 2 : None
Hard d i s k 1 : Type 14
Hard d i s k 2 : None
Base memory s i z e : 640 kB
Expansion memory s i z e : 3072 kb
Video mode: No video
Math coprocessor: A v a i l a b l e
S e c u r i t y menu
Enhancement menu
Store and e x i t
Use arrows to s e l e c t o p t i o n <Enter> = Enable entry
<H>= Help
<Esc> = E x i t w i t h o u t changes < ! > = Execute exter nal comnand
5.
Move the highlight to the option Enhancement menu with the
arrow
keys, and press
Enter.
2-24