Nokia Alfaskop TT/386 User Manual page 14

Equipment
f o
ö
1. Power switch
2. Receptacle for power cord
3. Power connector for monitor
4. Serial port
5. NDC display adapter
6. Parallel port
7. Connector for keyboard
The receptacles and connectors for the power cords and cables are
placed on the back panel of the system unit. This is also where the
power switch, the 9-pin serial port, and the 25-pin parallel port are
located. There are five board slots, one of which is left free for e.g.
connection to a local area network.
The power connector is protected with a separate fuse. Maximum
current drain is 0.5 A at 230 V. Power to the power connector is
controlled by the system unit's power switch. For example a monitor
can be powered via this connector.
Depending on the type of power plug to be connected, an adapter
may be required.
1-4